X-Seal > Introduction to X-Seal

By |2020-05-13T13:57:04+01:00May 13th, 2020|

X-Seal is a single component, flexible, hydrophobic polyurethane sealant. Originally developed for the sealing of fluids and gasses in the mining industry, it has a wide variety of sealing and bonding applications. It has particularly been used during assembly of chambers, manhole sections and vaults, creating a super-strong, infallible and air-tight seal. It can also [...]

Comments Off on X-Seal > Introduction to X-Seal

SC-Pox > Installation Method

By |2020-05-13T13:28:11+01:00May 13th, 2020|

1. Remove centre clip divider separating components 2. Thoroughly mix contents to a consistent colour 3. Re-attach centre clip as handle 4. Cut off corner of bag for easy application - 5. Spread evenly over surface to be repaired

Comments Off on SC-Pox > Installation Method

SC-Pox > Advantages

By |2020-05-13T13:18:48+01:00May 13th, 2020|

Reduces product waste 100% solid monolithic Superior adhesion Fast cure time May be applied at temperatures between 5˚C and 50˚C Viscous

Comments Off on SC-Pox > Advantages

SC-Pox > Introduction to SC-Pox

By |2020-05-13T13:39:58+01:00May 13th, 2020|

SC-POX is excellent for rehabilitating a manhole or for structural spot repairs. SC-POX is a premium 100% solids epoxy that offers outstanding chemical resistance and lasting durability with adhesion to concrete substrates and metal surfaces. It is pre-packaged as a no-mess coating system that offers excellent coverage and shrink resistance. SC-POX is ideal for spot [...]

Comments Off on SC-Pox > Introduction to SC-Pox

HyperFlex > Storage & Shelf Life

By |2020-05-12T21:45:28+01:00May 12th, 2020|

Storage Maintain seal until ready for application Product is moisture sensitive Store at a temperature between +5 and +25°C. Shelf life Shelf life is 2 years in an unopened container, provided the storage instructions (above) are followed correctly.

Comments Off on HyperFlex > Storage & Shelf Life

HyperFlex > Installation Method

By |2020-05-12T21:41:47+01:00May 12th, 2020|

Application is simple… Inspect and remove all debris Drill 10mm hole to intersect crack/joint Insert tip into hole Pump in Hyperflex Easy, 4-step instructions; Step 1: Using a 12mm masonry bit, drill at a 45° angle to intersect the leakpath about halfway through the thickness of the substrate. For example, a 15cm [...]

Comments Off on HyperFlex > Installation Method

HyperFlex > Advantages

By |2020-05-12T21:05:53+01:00May 12th, 2020|

Ideal for tunnels, manholes, ground stabilisation, car parks, bunds etc Pre-catalysed - no mixing and no guesswork required Supplied in 18.9 litre barrels or a 300ml tube Non-shrinking and highly expansive (20:1 expansion ratio) Flexibility accommodates movement while maintaining seal Extremely simple to apply Resealable/re-usable Has US approval NSF 61-2007, for contact with [...]

Comments Off on HyperFlex > Advantages

HyperFlex > Introduction to HyperFlex

By |2020-05-12T21:00:33+01:00May 12th, 2020|

HyperFlex instantly stops water infiltration, with a pre-catalysed closed cell hydrophobic grout that does not shrink. HyperFlex is suited to widespread lower flow rate infiltration. It can be used on any void which needs to be filled, down to the finest of cracks. It can also be used for ground stabilisation purposes. [...]

Comments Off on HyperFlex > Introduction to HyperFlex

Sealguard II > Storage & Shelf Life

By |2020-05-12T12:11:52+01:00May 12th, 2020|

Storage Do not crush containers. Avoid contact with moisture. Store between 5°C and 25°C. Shelf life Shelf life is 2 years in an unopened container, provided the storage instructions are followed correctly.

Comments Off on Sealguard II > Storage & Shelf Life

Go to Top