At the beginning of 2017 Flexseal launched a unique coupling for 4-inch pipes with internal diameters between 99-103mm. The coupling overcame common issues lots of contractors faced, which was connecting pipes with very little of no external surface to install a traditional coupling. Many pipes underground are often found encased in concrete or surrounded by brick or other hard materials, which can take many hours to excavate.
The Flexseal Icon Pushfit simply pushes into the problem pipe and grips to the internal surface whilst the opposite end does the same to the connecting pipe and thus creating a reliable and watertight seal.
Since its launch, Flexseal has received an overwhelming amount of positive feedback and calls for similar products to connect 4-inch pipes with differing internal diameters.
The Company can now announce that it has lunched two more products to add to the Icon Pushfit range. The IC100P is now joined by the IC95P and the IC95-100P, the products size ranges are as follows…
IC95P: Applies to 93-98mm internal diameter pipes
IC100P: Applies to 99-103mm internal diameter pipes
IC95-100P: Applies to pipes that differ in internal diameter – pipe 1: 93-98mm, pipe 2: 99-103mm.
“We now have Icon Pushfits to connect to any 4-inch pipe material. Our first product has given us the justification that the market has a call for this type of connection, hence the reason we’ve developed the range even further and we’ll continue to do so to meet market demands.” Stated Ben Beatson, Product Development Manager for Flexseal.