QwikSeal

If you can core through it, QwikSeal can connect to it.

QwikSeal allows you to connect service pipe to solid wall, profile, closed profile and corrugated pipe.

Features

• Meets ASTM C 923
• Colored for easy identification - Grey for Sch. 40 pipe inlet, Green for SDR-35 pipe inlet
• Creates a compression seal that is water tight up to 10 psi
• Can handle up to 7 degrees of deflection
• No need to excavate the entire line
• Tap into new, existing and rehabilitated sanitary, storm lines and retention systems
• Available in 4" , 6" and 8" sizes for fast, simple and reliable installation

Specifications

• QwikSeal Technical Data Sheet
• Hole Saws Coring Bits TDS
  • Gasket Material - Neoprone
  • Clamp
    1. Band - 301 St. Stl. .025 x .500 x Length
    2. Housing - 301 St. Stl. Fernco
    3. Screw - 305 St. Stl. 5/16" Hex no Slot

Models

Part No.	Description
QS-4	Connects 4" SDR-35 pipe to 8" and larger pipe
QS-4S40	Connects 4" SCH-40 pipe to 8" and larger pipe
QS-6	Connects 6" SDR-35 pipe to 10" and larger pipe
QS-6S40	Connects 6" SCH-40 pipe to 10" and larger pipe
QS-8	Connects 8" SDR-35 pipe to 15" and larger pipe

 

Accessories

• Deep Hole Saw For Plastic Pipe
  • QS-5x6HS - 5" x 6" Hole Saw with Arbor
  • QS-7x6HS - 7" x 6" Hole Saw with Arbor
  • QS-9x6HS - 9" x 6" Hole Saw with Arbor
  • QS-SAW5 - Hole Saw Only 5"
  • QS-SAW7 - Hole Saw Only 7"
  • QS-SAW9 - Hole Saw Only 9"
  • QS-ARBOR - 3/8" x 12" Drill with 1/2" Arbor
  • QS-ADAPTER - 1 1/4" x 3/4" Coring Machine Adapter
• Diamond Tipped Coring Bit for Concrete & Clay
  • QS-5x14CB 5" OD x 14"
  • QS-7x14CB 7" OD x 14"
  • QS-9x14CB 9" OD x 14"

QwikSeal

Connect service pipes to ALL KNOWN concrete, clay and plastic pipes.. This installation video will show you how simple it is.

 

Testimonial

"I had the chance to go on a job this morning to see a demonstration with the QwikSeal. They were having trouble yesterday putting in a competitors product and after two hours of screwing around with it, they gave up for the day. I showed up this morning and within five minutes, they had the QwikSeal installed. Both the contractor and the county were extremely happy with the results and they asked me to make sure all of our distributors were stocking the QS-4, QS-6 and QS-8."

- C.P. Ward Contractors

Document Downloads:

• QS-4, 4" QwikSeal SDR 35
• QS-4S40, 4" QwikSeal SCH 40
• QS-6, 6" QwikSeal SDR 35
• QS-6S40, 6" QwikSeal SCH 40
• QS-8, 8" QwikSeal SDR 35